steps of how to make concrete interlocking blocks by automatic brick making machine

Here are the steps for making concrete interlocking blocks using an automatic brick making machine:

1. Preparation:

- Choose the appropriate mixture for the concrete, considering the required strength and durability.

- Prepare the raw materials, including cement, sand, aggregate, and water.

- Ensure the automatic brick making machine is clean, well-maintained, and in proper working condition.

2. Mixing:

- Measure the proportions of the raw materials, as per the recommended concrete mix design.

- Load the necessary quantity of cement, sand, aggregate, and water into the automatic brick making machine's hopper or feeder.

- Start the machine and let it mix the components thoroughly to obtain a homogeneous mixture.

3. Block formation:

- Check the mold inside the automatic brick making machine and ensure it is clean and free from any debris or residue.

- Pour the mixed concrete into the mold, ensuring it is evenly distributed.

- Activate the machine, which will initiate the compression and vibration process.

- Allow the machine to compress and vibrate the concrete mixture, shaping it according to the desired interlocking block mold design.

4. Curing and drying:

- Once the block formation process is complete, the blocks need to be cured.

- Depending on the concrete mix proportions and ambient conditions, the curing period can range from a few days to a few weeks.

- Ensure that the blocks are protected from direct sunlight, extreme temperature variations, and excessive moisture.

- The blocks should be allowed to dry completely before further handling or stacking.

5. Quality control:

- Inspect the interlocking blocks for any defects or imperfections.

- Ensure that the blocks are of the required size, shape, and strength as specified in the design.

- Perform necessary tests, such as compressive strength tests, to ensure the blocks meet the specified standards.

Note: The exact process may vary depending on the specific type and model of the automatic brick making machine being used. It is essential to refer to the manufacturer's instructions and guidelines for the particular machine in use.