Views: 1 Author: Fuda block machine Publish Time: 2023-06-27 Origin: Site
Making concrete blocks using an automatic brick making machine is a simple process that can be broken down into the following steps:
1. Prepare the ingredients: Collect cement, sand, and gravel or crushed stone in the required proportions. The ideal proportions for making concrete blocks are 1 part cement, 3 parts sand, and 5 parts gravel or crushed stone.
2. Mix the concrete: Use a concrete mixer to blend the ingredients together until the mixture is uniform and of a consistent quality.
3. Set up the automatic brick making machine: Place the machine on a flat and even surface and ensure that it is stable.
4. Load the concrete mixture: Use a conveyor belt or wheelbarrow to transfer the mixed concrete into the hopper of the brick making machine.
5. Turn on the machine: Start the machine and set the desired pressure and vibration frequency.
6. Automatic production: The machine will automatically produce different sizes and shapes of concrete blocks.
7. Curing: Allow the blocks to cure for a minimum of 12 hours to ensure that the concrete sets and hardens properly.
8. Remove the blocks: After the blocks are cured, remove them from the machine and place them in a safe and dry area.
By following these steps, you can efficiently produce high-quality concrete blocks using an automatic brick making machine. It is important to ensure that proper safety gear and procedures are followed during the operation of the machine.