This machine can produce 2 pieces block at one time.Using hydraulic technology,so the blocks produced are of good quality, large density and high strength.There is a wide range raw material available cement, sand, clay, shale, fly ash and white lime or other materials. The QT2-10 is a type of clay block making machine that is commonly used in the construction industry to produce various types of concrete blocks, bricks, and other masonry units. Here's an introduction to the machine along with its key parameters: Introduction to the QT2-10 Clay Block Making Machine The QT2-10 clay block making machine is a semi-automatic or fully automatic device designed to manufacture clay or concrete blocks efficiently. It is widely adopted in small to medium-sized construction projects due to its versatility, ease of operation, and relatively low cost compared to larger industrial machines. The machine can produce a variety of block sizes and shapes, making it suitable for residential, commercial, and infrastructural developments. Key Parameters of the QT2-10 Clay Block Making Machine 1. Production Capacity: - Depending on the model and configuration, the QT2-10 can typically produce between 720 to 1440 standard bricks per hour. This rate may vary based on factors such as the type of material used, moisture content, and operator proficiency. 2. Brick Sizes: - The machine is capable of producing multiple standard brick sizes, including but not limited to 240x115x53 mm, 240x115x70 mm, and 240x115x90 mm. Custom sizes can also be produced with appropriate mold adjustments. 3. Power Requirements: - The QT2-10 generally requires a power supply of around 7.5 kW to 11 kW, depending on the specific model and additional features like vibration tables or automatic feeding systems. 4. Dimensions (L x W x H): - The physical dimensions of the QT2-10 can vary, but a typical unit might measure approximately 2,500 mm in length, 1,200 mm in width, and 1,500 mm in height. These dimensions are subject to change based on the manufacturer and any optional accessories included. 5. Weight: - The weight of the machine usually ranges from 1,500 kg to 2,500 kg, depending on the materials used in construction and any additional components. 6. Feeding System: - The QT2-10 often incorporates an automatic feeding system that ensures a consistent supply of raw materials into the molding chamber, improving production efficiency and reducing manual labor. 7. Vibration System: - An integral part of the machine is the vibration system, which compacts the material within the molds to achieve high-density blocks. This system typically operates at variable frequencies to accommodate different types of materials and desired block densities. 8. Control System: - Modern versions of the QT2-10 may feature advanced control systems, including programmable logic controllers (PLC), touchscreen interfaces, and automated monitoring for process optimization and fault detection. 9. Mold Options: - Interchangeable molds allow the production of various block shapes and sizes without significant downtime, enhancing the machine's versatility. 10. Maintenance & Durability: - Regular maintenance is crucial for ensuring longevity and optimal performance. Manufacturers typically provide guidelines for routine checks, lubrication schedules, and part replacements. High-quality materials and robust construction contribute to the machine's durability under continuous operation.
